View TLBD1052_4524686.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLBD1052(T20),TLEGD1052(T20)
Preliminary
Panel Circuit Indicator
TOSHIBA LED Lamp
TLBD1052(T20),TLEGD1052(T20)
unit mm * * * * * 5.2 (L) x 5.2 (W) x 4.0 (H) mm size TL H1052 (T20) Series 3.6 x 4.4 mm transparent oval lens top type Colors : Blue : Green d 470 nm (typ.) d 528 nm (typ.)
Clear luminescence is obtained. High Operating Temperature : Topr = -40~100C (85 ) : Tstg= 40~110
* * * *
Can be mounted using surface mounter. Reflow Soldering is possible. Standard Embossed Taping 8 mm pitch : T20(400pcs/Reel) Applications : message signboards, backlighting, amusement, etc
Color and Material
Product Name TLBD1052 TLEGD1052 Color Blue Green Material InGaN InGaN
JEDEC JEITA TOSHIBA Weight: 0.085g
4-5AU1
1
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
Absolute Maximum Ratings (Ta = 25C)
Product Name TLBD1052 TLEGD1052 Forward Current IF (mA) Please see Note 1 30 Reverse Voltage VR (V) 4 Power Dissipation PD (mW) 120 Operation Temperature Topr (C) -40~85 -40~100 Storage Temperature Tstg (C) -40~110
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Forward current derating
IF - Ta
35
(mA)
30 25 20 15 10 5 0 0
TLBD1052
IF
Allowable forward current
TLEGD1052
20
40
60
80
100
120
Ambient temperature
Ta
(C)
Electrical Characteristics (Ta = 25C)
Product Name TLBD1052 TLEGD1052 Unit Forward Voltage VF Min. 2.7 2.7 Typ. 3.3 3.3 V Max. 4.0 4.0 IF 20 mA Reverse Current IR Max. 10 A VR 4 V
2
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
Optical Characteristics-1 (Ta = 25C)
Product Name TLBD1052 TLEGD1052 Unit Luminous Intensity IV Min. 85 272 mcd Typ. 300 850 mcd Max. 736 2300 mcd IF 20 20 mA Available Iv rank Please see Note 2 N/P/Q Q/R/S
Note 2: The specification on the above table is used for Iv classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Luminous Intensity IV Min N P Q R S Unit 85 153 272 476 850 mcd Max 230 414 736 1290 2300 mcd
Rank
Optical Characteristics-2 (Ta = 25C)
Emission Spectrum Product Name Peak Emission Wavelength p Min Typ Max 468 518 nm Typ 25 35 nm Dominant Wavelength d Min 463 517 Typ 470 528 nm Max 479 540 IF
TLBD1052 TLEGD1052 Unit
20 mA
The cautions
* ESD withstand voltage according to MIL STD 883D, Method 3015.7 : 1000V When handling this LED, take the following measures to prevent the LED from being damaged or otherwise adversely affected. 1) Use a conductive tablemat and conductive floor mat, and ground the workbench and floor. 2) Operators handling laser diodes must be grounded via a high resistance (about 1M). A conductive strap is good for this purpose. 3) Ground all tools including soldering irons. These products are designed as a general display light source usage, and they have applied the measurement standard that matched with the sensitivity of human's eyes. Therefore, they are not intended for usage of functional application (ex. Light source for sensor, optical communication and etc) except general display light source.
*
3
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
TLBD1052
IF - V F
100 Ta = 25C 1000 500 30 Ta = 25C
IV - IF
10
Luminous intensity IV (mcd)
2.6 3.0 3.4 3.8 4.2 4.6 5.0
(mA)
300
Forward current IF
100
50 30
3
1 2.2
10 1
3
5
10
30
50
100
Forward voltage VF
(V)
Forward current IF
(mA)
10 5 3
IV - Tc
1.0
Relative luminous intensity - wavelength
Ta = 25C
Relative luminous intensity IV
Relative luminous intensity
-20 0 20 40 60 80 100
0.8
0.6
1 0.5 0.3
0.4
0.2
0.1
1 300
400
500
600
700
Case temperature Tc (C)
Wavelength (nm)
Radiation pattern Ta = 25C
4
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
TLEGD1052
IF - V F
100 Ta = 25C 10000 5000 3000 Ta = 25C
IV - IF
30
Luminous intensity IV (mcd)
Forward current IF
(mA)
10
1000
500 300
3
1 2.2
2.6
3.0
3.4
3.8
4.2
5.0
100 1
3
5
10
30
50
100
Forward voltage VF
(V)
Forward current IF
(mA)
IV - Tc
10 1.0
Relative luminous intensity - wavelength
Ta = 25C 0.8
Relative luminous intensity IV
5 3
Relative luminous intensity
0.6
1 0.5 0.3
0.4
0.2
0.1
-20
0
20
40
60
80
100
1 300
400
500
600
700
Case temperature Tc (C)
Wavelength (nm)
Radiation pattern Ta = 25C
5
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
Packaging
These LED devices are packed in an aluminum envelope with silica gel and a moisture indicator to prevent moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air before soldering and they should therefore be stored under the following conditions: 1. This moisture-proof bag may be stored unopened for up to 12 months under the following conditions. Temperature: 5C~30C Humidity: 90% (max) 2. After the moisture-proof bag has been opened, the devices should be assembled within 72 hours in an environment of 5C to 30C/70% RH or below. 3. If, upon opening, the moisture indicator card shows humidity of 30% or above (when the indication color changes to pink) or the expiration date has passed, the devices should be baked while packed in the tape reel. After baking, use the baked devices within 72 hours, but perform baking only once. Baking conditions: 60 5C, for 12 to 24 hours. Expiration date: 12 months from the sealing date, which is imprinted on the same side as this label. 4. Repeated baking may cause the peeling strength of the tape to change, leading to trouble in mounting. Also, be sure to prevent damage to the device from static electricity during the baking process. 5. Any breakage in the laminate packing material will cause the hermetically of the product to deteriorate. Do not toss or drop the packed devices.
Mounting Method
Soldering
* Reflow soldering (example)
Temperature profile for Pb soldering (example) 10 s max (*) 240C max Package surface temperature (C) Temperature profile for Pb-free soldering (example) 5 s max(*) 260C max Package surface temperature (C)
(*)
(*)
140~160C max(*) 4C/s max
(*)
4C/s max(*) max(*) 150~180C 230C
4C/s max(*) 60~120 s max(*) Time (s)
(*) 4C/s max
max(*) 60~120 s Time 30~50s max(*) (s)
*
The product is evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Perform the first reflow soldering in accordance with the above temperature profile and within 72 hours of opening the package. Second time reflow In case of second reflow soldering should be performed within 72 hours of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 5 30C, 70% RH max Do not perform flow soldering. Make any necessary soldering corrections manually. (only once at each soldering point) Soldering iron: Less than 25 W Temperature : Less than 350C or less Time : within 3 s (Up to 1time per place)
* *
* *
6
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
Recommended soldering pattern
2.45 1.3 2.45 2.7 Unit: mm
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. Our dipping tests (carried out under the recommended conditions) confirm that these solvents have no effect on semiconductor devices. In selecting the cleaning solvent you will actually use, be sure to take into account the cleaning conditions and usage conditions.
Cleaning Solvent
ASAHI CLEAN AK-225AES KAO CLEANTHROUGH 750H PINE ALPHA ST-100S TOSHIBA TECHNOCARE (FRW-17, FRW-1, FRV-100)
Manufacturer
ASAHI GLASS KAO ARAKAWA CHEMICAL GE TOSHIBA SILICONES
Precautions When Mounting
Do not apply force to plastic parts of the LED under high-temperature conditions. The LED plastic is easily scratched. Avoid friction between plastic parts and hard objects or materials. When installing the PCB in a product, ensure that the device does not come into contact with other components.
Tape Specifications
This specification lays out the 8 mm pitch embossed-tape packing requirements for 5.2 mm (L) x 5.2 mm (W) x 4.0 mm (H) size surface-mount LED lamp.
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (This method, however, does not apply to products whose electrical characteristics differ from standard Toshiba specifications.) (1) Tape Type: T20 (8-mm pitch) (2) Example
TLBD1052 (T20)
Tape type
Toshiba product No.
2. Related Matters
(1) Electro-optical Characteristics Please refer to the each technical datasheet for electro-optical characteristics of tape packed products. (2) Handling Precautions Tape material protected against static electricity. However, static electricity may occur depending on quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when peeling a tape cover. (a) In process, taping materials may sustain an electrostatic charge, use an ionizer to neutralize the ions. (b) For transport and temporary storage of devices, use containers (boxes, jigs, bags) that are made of anti-static materials or of materials that dissipate electrostatic electricity.
7
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
3. Tape Dimensions
Unit in mm Symbol D E P0 t F D1 Dimension 1.5 1.75 4.0 0.4 5.5 1.6 Tolerance +0.1/-0 0.1 0.1 0.05 0.05 0.1 Symbol P2 W P A0 B0 K0 Dimension 2.0 12.0 8.0 5.5 5.5 4.4 Tolerance 0.05 0.2 0.1 0.1 0.1 0.1
P0 D P2 E F W t
K0
B0 POLARITY
A0
P
D1
4. Reel Dimensions
Unit in mm 13 0.3 15.4 1.0 180 +0 -4
2 0.5
13
60
44
8
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
5. Leader and Trailer
40 mm or more (Note 1)
40 mm or more (Note 2) Leading part 190 mm (min)
Note1: Empty trailer section Note2: Empty leader section
6
Packing display
Packing quantity Tape type T20 No. Reel 400 pcs Carton 2000 pcs
Bar-code label
Item Reel Silica gel with a humidity indicator Aluminum pack Cushion Carton
Bar-code label
comment
Packing form: Each reel and a silica gel with a humidity indicator are sealed in an aluminum pack.
9
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
7 Label format
Example
See below for how to decipher the Lot Number.
P/N
TOSHIBA
TYPE TLBD1052 ADDC (T20)
Lot. Number & Symbol for control (Rank symbol) Use under 5-30degC/70%RH within 72h G / RoHS COMPATIBLE *(Y)380 400 Symbol for control
TY
400pcs
400
SEALED May,17,2007 DIFFUSED IN USA ASSEMBLED IN JAPAN

*
Label location
Reel
* Tape reel direction
Carton
Label position Label position The aluminum package in which the reel is supplied also has a copy of the label attached to the center of one side. *The Lot Number includes the following information. Example: 270 7 E 2 G a a: b: c: d: e: bcde Domestic ID Last digit of the year (CE): "0" (Y2000), "1" (Y2001), "2" (Y2002) ~ "9" (Y2009) Repeated for each decade Month: "A" (Jan), "B" (Feb), "C" (Mar) ~ "L" (Dec) Decade of the month: "1" (First), "2" (Middle), "3" (Last) Day in d above: "A" (1st), "B" (2nd), "C" (3rd) ~ "J" (9th), "K" (10th) "L" denotes the 31st of the month "I" is not used to denote a day in this date system "Packaged May 17, 2007" *
10
2008-01-10
TLBD1052(T20),TLEGD1052(T20)
RESTRICTIONS ON PRODUCT USE
030619EAC
* The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
11
2008-01-10

▲Up To Search▲

Price & Availability of TLBD1052

	To Download TLBD1052 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .